outdoor playground tents knowledges

outdoor playground tents knowledges

outdoor playground tents knowledges

outdoor playground tents knowledges

May 27, 2021

outdoor playground tents style
triangle tent
The front and back use herringbone iron pipes as the support, the middle frame is connected by a cross bar, the inner tent is supported, and the outer tent can be installed. This is the most common tent style in the early days.

Dome-shaped (yurt-style) tent
It adopts double-rod cross support, which is relatively easy to disassemble and assemble. It is the most popular on the market at present.

Hexagonal tent
It adopts three-pole or four-pole cross support, and some adopts six-pole design, which pays attention to the stability of the tent, which is a common style of "mountain-type" tents.


What kind of material is good for outdoor playground tents ?
The materials of outdoor camping tents can be divided into fabrics, linings, bottom materials, and poles.

1. Fabric

Compared with different fabrics, nylon silk is thin and light, suitable for mountaineering and trekking campers. Oxford cloth is thick, but heavier, suitable for making tents for driving camping or small groups. From the perspective of waterproof coating, although PVC waterproof is good, it will harden and become brittle in winter, and it is easy to crease or break. PU coating not only overcomes the defects of PVC, it is also very waterproof. With multiple-coated PU, the waterproof pressure can reach more than 2000mm.

2. Lining

The lining (inner tent material) is usually made of cotton-style nylon silk with good air permeability. From the perspective of use, nylon silk has better performance than cotton. When camping outside, tents are easy to absorb moisture, cotton cloth is not easy to mold in the sun, and nylon silk is easy to dry and not easy to mold.

3. Bottom material

The main functions of the tent bottom are waterproof, moisture-proof and dust-proof. The choice of bottom material also determines the grade of the tent. Low-end tents are usually made of PE

The base material, and some use PVC, is for low cost, double-sided laminated PE, although it is waterproof and moisture-proof, it is easy to wear and leak. In winter, it is the nemesis of PVC base material, while PU-coated Oxford cloth is used. The base material, whether it is robustness, cold resistance, or water resistance, greatly exceeds PE.

4. Struts

The poles of the tent are the skeleton of the tent. The quality of the frame material not only affects the life of the tent, but also affects the stability of the tent. Early tent poles often used reinforced materials, which not only increased the weight of the tent, but also had poor resilience. The improved tent frame uses glass fiber brace, its weight is reduced, the resilience is improved, and the cost is lower. Therefore, the current tent manufacturers mostly use this kind of material as the brace, but the fiberglass brace is strong and sturdy. The performance is not ideal. If the brace is thickened to increase the strength, it also increases the weight. The ideal struts are aluminum alloy materials. The struts connected with high-strength alloy pipes not only have high strength, but also have light weight and good resilience.

The kid tents produced in our company be used the strong elastic stell as the pole,have light weight and good resilience.